Synology NAS is a network-attached storage device with a variety of functions including backing up computer drive and managing and storing media files. Your Synology NAS can be covered with VPN protection in 2 ways:
Before you start setting up VPN on Synology NAS using L2TP, you need to generate the required VPN configurations in your User Office. Check out the guide How to manually create VPN configurations for detailed instructions.
The VPN configurations for L2TP protocol will include chosen VPN server domain name, pre-shared key (psk), login, and password.
7. On the Advanced Settings screen, select MS CHAP v2 authentication and check the box in front of the following fields:
Get VPN Unlimited right now and start enjoying a secure and private internet with absolutely no borders!
Before you enable the VPN connection, we recommend to turn off IPv6 on your Synology NAS. This will help you avoid IPv6 traffic leaks outside the VPN tunnel.
To do this, follow the few simple steps below:
The VPN profile you’ve just created will appear on the Network Interface window. To establish connection with the VPN server, click on your new VPN Profile and press Connect.
That’s it! The Synology VPN setup is complete and your Synology NAS traffic is now protected by KeepSolid VPN Unlimited.
To disconnect from the VPN server on your Synology, navigate to Control Panel > Network > Network Interface. Click on the relevant VPN profile and press Disconnect.
Get VPN Unlimited, set it up on your Synology NAS, and figure out what does top-notch privacy mean.